for under $100
– Pocket jig and screws – Miter or circular saw – pressure treated pine lumber – Drill – Deck screws 2 3/4” – Hole saw
Determine desired width of table. We used 2×10 pressure treated lumber. Three boards made the table width be 27.75” (actual width of x10 lumber is 9.25”).
step 1
Join table top boards together with Kreg pocket jig and screws
step 2
Cut leg boards (also 2×10) to desired length.
step 3
Join leg boards together with kreg jig and screws like you did for the top boards. Then, attach top boards to leg boards with pocket jig and screws.
step 4
Using a 2×4 PT, cut a 45 degree triangle starting at the corner. Using deck screws, attach triangular bracing.
step 5
Stain and add an umbrella opening using a hole saw if desired.
step 6