See how to build this stylish wooden plant stand for $10!
Want to see how I built this stylish wooden plant stand for only $10?
– 3/4” x 3/4” oak dowel square, – 1”x4” common board – Pocket Hole Jig – Wood Stain – White paint (for dip dye effect)
Cut Common Board to desired width. Then, Form “x” (pictured below) using either dowel or 1/2 lap joint method.
Determine desired height of plant off ground. Then, cut legs to desired height. Mark legs and attach to “x” using Kreg jig
Apply wood stain of choice and allow to dry. If you want the white dip dye, you can then tape off where you want the white and spray paint the bottoms of the legs.
Once everything has dried, set your pot of choice on the center of the "x'. Voila!