Supplies Needed:
– 1.25” wood screws – Tongue and Groove Board (8) – 1”x 4”x 6′ Common Board – Chrome Square Door Hinges (4) – 18” Chrome Handles – Table Saw
Cut tongue and groove pattern board to height with table saw using 1/4” gap at top and bottom of door opening.With table saw, rip (cut length wise) two middle boards .
step 1
Join pattern boards by tongue and groove.
step 2
Cut common board to width of doors (4 pieces total) for 2 doors. Then, attach common board with wood screws from the backside of door so that screws are hidden.
step 3
Attach hinges to common board and door jamb.
step 4
Now you can stain your doors to desired finish and add handles for character and function!
step 4