just in time for summer!
– clamps – circular or miter saw – hole saw – brad nailer – drill
Materials Needed:
– 4 2x4x8’s – 2 4×2 plywood sheets – 1 box of 3” deckmate screws – decals of choice – stain and wood sealant
Once you have made cuts, Build box frame. Screw through ends of 4ft piece into face of 21” piece. Hold the 2×4’s in place using clamps.
step 1
On plywood, measure 12” across and 9” down. This will mark the drill hole. (we used a pencil to mark).
step 2
Drill hole using hole saw to drill.
step 3
Attach plywood to frame using 18 gauge brad nails. Then attach legs (use 12” 2×4) using 3” deck screws
step 4
Once you have lightly sanded, stained and sealed your boards, you can apply your custom decal according to manufacturer's directions.
step 4